Desk set up for recording, with a laptop, a camera on a mini tripod, a studio microphone and headphones

Free tool · No upload · No sign-up

Extract Audio from Video Separate the audio from any video, free online

Choose a video and save its audio track as its own file. This audio extractor is free, needs no sign-up and runs in your browser, so the video stays on your device.

  • M4A · MP3 · WAV
  • Original quality with M4A

How to extract audio from a video

M4A is preselected because it keeps the sound exactly as recorded. Switch to MP3 or WAV when the next app needs it.

Extract audio from a video in three steps

  1. Press Choose a video and pick the file, or drag it onto the box.
  2. Leave M4A selected for an exact copy of the sound, or switch to MP3 or WAV.
  3. Press Extract M4A (the button follows the format you pick), play the audio in the page, then press Download M4A.

With an MP4 or MOV, an M4A extraction is a straight copy of data already in the file, so it finishes quickly even for long recordings.

first audio track in the video
 │
 ├─ AAC  (MP4, MOV, most phone videos)
 │    └─ M4A  → copied bit for bit
 │
 ├─ Opus, AC-3, MP3, PCM…  (WebM, MKV, AVI)
 │    └─ M4A  → encoded as AAC 192 kbps
 │
 ├─ MP3  → LAME, 128 / 192 / 320 kbps
 └─ WAV  → PCM, 16-bit, original sample rate
For AAC audio, the M4A is the original stream in a new container: same codec, same bitrate, same length.

Why M4A is the default for extracting audio

Most videos from phones, cameras and editing apps store their sound as AAC. M4A is the audio-only form of the same MP4 family, so the extractor can lift the AAC stream out and place it in an M4A without decoding it. The file you download is the sound the video plays, unchanged.

MP3 and WAV both start by decoding that stream. MP3 then compresses it again; WAV writes it out uncompressed. Each has a place, listed below, but for a faithful copy of the track M4A gets there with the fewest steps.

FormatWhat happensPick it for
M4AAAC copied as isArchiving, Apple devices, re-use in an edit
MP3Decoded, re-encoded at 128–320 kbpsSharing, websites, older players
WAVDecoded, stored uncompressedDAWs, noise reduction, transcription
WebM, MKV and AVI files often carry Opus, AC-3 or MP3 audio; for those, M4A is a fresh AAC encode at 192 kbps.

Separate audio from video for editing

The extracted file runs the length of the recording, so it lines up again when placed back under the picture. Clean it in a DAW, remove hum or room echo, then drop it onto the timeline and mute the camera audio.

The extractor takes the first audio track, which in phone, camera and screen recordings is the main mix. For an MKV with several language or commentary tracks, the first listed track is the one saved; MKVToolNix can pull any other track by number.

Video editor at a laptop timeline, with a camera, two memory cards and a phone on the desk

What does it mean to extract audio from a video?

Extracting audio from a video means saving its sound track as a separate audio file and leaving the picture behind. With a direct stream copy, the extracted audio is identical to what the video plays: same codec, same bitrate, same length. Saving as MP3 or WAV converts that same track instead of copying it.

Every video file holds its picture and sound as separate streams that play in sync. An audio extractor reads the container, finds the sound stream and writes it into an audio-only file. Whether that involves any re-encoding depends on the codec in the video and the format you ask for.

Copying a track versus converting it

The tool runs FFmpeg, compiled to WebAssembly, in your browser tab. When you choose a video, it lists the streams inside. For M4A, when the first audio stream is AAC, FFmpeg copies the compressed packets into a new M4A container, with no decoding and no encoding, and moves the index to the front so the file starts playing straight away. When the stream uses another codec, such as Opus in a WebM, it is encoded to AAC at 192 kbps instead.

For MP3, the stream is decoded and encoded with LAME at the bitrate you pick. For WAV, it is decoded and written as 16-bit PCM at its original sample rate. The video stream is never decoded in any of these paths.

Video formats the extractor reads

MP4 and MOV from phones and cameras, MKV from OBS and video archives, WebM from browser screen recorders, AVI from older software, plus M4V, 3GP, FLV and MPEG transport streams. The video codec makes no difference, since the picture is skipped. On the audio side the extractor decodes AAC, MP3, Opus, Vorbis, AC-3, FLAC and PCM, the codecs found in everyday files.

What changes from file to file is how much work M4A needs. AAC audio, the norm in MP4 and MOV, is copied. Other codecs are converted to AAC. For a WebM or MKV with Opus audio, WAV gives you the decoded sound with no further loss, which is often the better pick for editing.

How to get audio from a video on iPhone, Android, Windows and Mac

This page works the same everywhere: open it in Safari, Chrome, Edge or Firefox, choose the video and press Extract M4A, or switch formats first. On iPhone the file saves to Downloads in the Files app; on Android, to the Downloads folder; on a computer, to your usual download location.

Desktop apps can do it too. On a Mac, QuickTime Player's File > Export As > Audio Only saves an M4A. On Windows and Mac, VLC converts a video to audio through Media > Convert / Save with an audio profile. Video editors such as Premiere Pro, DaVinci Resolve and CapCut can also export audio only from a timeline.

Ways editors use a separated audio track

  • Cleanup in a DAW. Noise reduction, EQ and compression work better in an audio program, on a file with the picture out of the way.
  • Podcast versions. A recorded interview becomes the audio episode, while the video goes to YouTube.
  • Music and sound beds. Keep a soundtrack you composed or licensed so it can go under a different cut.
  • Transcripts and captions. Send the audio, a fraction of the video's size, to a transcription service.

Two tools pair well with this one. Remove Audio from Video saves the picture with a silent track, ready for the cleaned audio to go back underneath. For talking-head footage, the silence remover cuts dead air out of the video itself.

Teleprompter Scrolling Scripts on iPhone, iPad and Mac, with the script scrolling over the camera

Next step

Record cleaner audio from the start

Separating audio is easier when the take is already tight. Read from the free online teleprompter while you film on a laptop, or use Teleprompter Scrolling Scripts on iPhone, iPad and Mac to scroll the script next to the camera. Its Voice mode records audio-only takes when there is no picture to shoot.

Frequently Asked Questions

How do I get just the audio off of a video?

Open this audio extractor, choose the video and press Extract M4A, or pick MP3 or WAV first. Play the result in the page, then download it. The audio is saved as its own file, the picture is left behind, and the video is never uploaded.

Can VLC extract audio from video?

Yes. In VLC on Windows or Mac, open Media > Convert / Save, add the video, pick an audio profile such as MP3 and set a destination file. This page is a quicker alternative with no install, and it can copy AAC audio into an M4A without re-encoding it.

Does extracting audio from a video lose quality?

Saving as M4A from an MP4 or MOV keeps the quality exactly, because the AAC track is copied rather than re-encoded. WAV keeps everything the track holds, uncompressed. MP3 adds one more round of compression, which is inaudible at 192 or 320 kbps for most uses.

Can I extract audio from video online without uploading it?

Yes. This page loads FFmpeg into your browser and processes the video locally, so the file never travels to a server. It works in Safari, Chrome, Edge and Firefox on phones and computers, free and without an account, and private recordings stay on your device.

Can I separate audio from video on iPhone?

Yes. Open this page in Safari, tap Choose a video, pick the clip from Photos or Files, then tap Extract M4A or switch to MP3. The audio file saves to Downloads in the Files app, ready to share or open in GarageBand.

Which audio track is extracted from a file with several tracks?

The first audio track listed in the file. In phone, camera and screen recordings that is the main mix. For an MKV with several languages or a commentary track, the first one comes out; MKVToolNix can extract any other track by its number.

Why is M4A the default format here?

Because most videos store their sound as AAC, and M4A can hold that AAC stream unchanged. The result is the original audio, at its original bitrate, with no re-encoding. Switch to MP3 for the widest compatibility or WAV for an editing copy.

Is this audio extractor free?

Yes, completely. There is no sign-up, watermark, file count or daily limit, and nothing to install. The extraction runs on your own device, so the only limit is its memory; files up to about 2 GB work comfortably on a computer.